Safety Footwear is governed by a European safety standard
which forms part of legislation, it is therefore imperative
that safety footwear is purchased from a reputable source
such as Stafford Industrial Supplies and carries the fixed
European standard mark EN345.
All safety footwear which carries the EN345 mark has been
tested in accordance with the standard, and has the following
safety features:
- A safety toe cap providing protection to 200 joules
impact.
- Has passed a compression test.
- The upper material is
of a quality and thickness that provides a level of abrasion
resistance.
- The sole compound is also tested for heat
resistance, abrasion, shock absorption, and its resistance
to both oil and certain chemicals.
Within EN345 there are other features added to the safety
footwear. These features are represented by abbreviations.
You will see these numbers or letters next to 'Safety Category
for each of the products listed above. Here is what the
abbreviations mean:
SB- Safety
Basic has all the features required to pass the standard.
SBP -
As SB with pierce resistant midsole
S1 - As SB with anti-static
sole and cushioned heel area
S1P - As S1 with
pierce resistant midsole
S2 - As S1 with
water resistant upper
S3 - As S2 with
pierce resistant midsole
The other relevant European standard mark is EN347 for
Occupational Footwear with anti-static and/or slip resistant
properties.
If you have any questions about features or standards
related to footwear please contact our industrial
safety products team who will be able to assist you.
|
