Safety Footwear is governed by a European
safety standard which forms part of legislation, it is therefore
imperative that safety footwear is purchased from a reputable source
such as Stafford Industrial Supplies and carries the fixed European
standard mark EN345.
All safety footwear which carries the EN345
mark has been tested in accordance with the standard, and has the
following safety features:
- A safety toe cap providing protection to
200 joules impact.
- Has passed a compression test.
- The upper material is of a quality and
thickness that provides a level of abrasion resistance.
- The sole compound is also tested for heat
resistance, abrasion, shock absorption, and its resistance to both oil
and certain chemicals.
Within EN345 there are other features added
to the safety footwear. These features are represented by
abbreviations. You will see these numbers or letters next to 'Safety
Category for each of the products listed above. Here is what the
abbreviations mean:
SB- Safety
Basic has all the features required to pass the standard.
SBP - As SB with pierce
resistant midsole
S1 - As SB with anti-static
sole and cushioned heel area
S1P - As S1 with pierce
resistant midsole
S2 - As S1 with water
resistant upper
S3 - As S2 with pierce
resistant midsole
The other relevant European standard mark
is EN347 for Occupational Footwear with anti-static and/or slip
resistant properties.
If you have any questions about features or
standards related to footwear please contact our industrial safety
products team who will be able to assist you.
|
